Fast drying, very little odor, and cleans up with water!

Zenith Powder Glaze Base is a unique glazing product used for creating "antique looks" and other special effects. Like traditional glaze it is designed to be applied over a sealed and sanded surface, but the Zenith Powder Glaze must be spray applied and then either wiped off while still wet, or removed with a synthetic Mirlon pad (or similar) after the glaze has quickly dried to a powder.

Dries to a powder in 10-20 minutes with normal airflow. This glaze can be topcoated in 30 minutes or whenever it has fully dried to powder form. Zenith Powder Glaze must be top coated.

Available in 4 standard colors

TDS_CA_LWS4700_Zenith_Waterborne_Powder_Glaze_Base.pdf (axalta.com)